2 open source boards using the MCP1700-2502E
Real designs built with the MCP1700-2502E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPTeensy eurorack
newdigate
64.8 × 109.2 mm52 parts2LMIT27
Teensy eurorack breakout
110.5 × 111.1 mm73 parts2LMIT258
The MCP1700-2502E in open source designs
The gallery holds 2 open source boards using the MCP1700-2502E from 2 GitHub repositories; a typical one measures about 87.6 × 110.2 mm and carries around 63 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Teensy eurorack breakout by newdigate.
Parts used alongside the MCP1700-2502E
Microcontrollers on boards using the MCP1700-2502E
What boards using the MCP1700-2502E are built for
MCP1700-2502E: common questions
Where can I find a MCP1700-2502E reference design?
Each of the 2 boards on this page is a real design using the MCP1700-2502E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP1700-2502E?
The 6N138, AD5754BREZ and AD7606BSTZ appear in the most repositories here.
Which microcontrollers do boards using the MCP1700-2502E use?
Most are built on NXP (1).
How big is a typical board using the MCP1700-2502E?
The median is 87.6 × 110.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP1700-2502E?
By GitHub stars, Teensy eurorack breakout by newdigate, with 258 stars.
Can I simulate one of these boards using the MCP1700-2502E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.