3 open source boards using the MCP1700T-3002E/TT

Real designs built with the MCP1700T-3002E/TT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MCP1700T-3002E/TT in open source designs

The gallery holds 3 open source boards using the MCP1700T-3002E/TT from 3 GitHub repositories; a typical one measures about 285 × 94.5 mm and carries around 211 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Stm32 mech keyboard by julbouln.

Microcontrollers on boards using the MCP1700T-3002E/TT

What boards using the MCP1700T-3002E/TT are built for

MCP1700T-3002E/TT: common questions

Where can I find a MCP1700T-3002E/TT reference design?

Each of the 3 boards on this page is a real design using the MCP1700T-3002E/TT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP1700T-3002E/TT use?

Most are built on AVR/Arduino (1), RISC-V (1) and STM32 (1).

How big is a typical board using the MCP1700T-3002E/TT?

The median is 285 × 94.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP1700T-3002E/TT?

By GitHub stars, Stm32 mech keyboard by julbouln, with 12 stars.

Can I simulate one of these boards using the MCP1700T-3002E/TT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.