10 open source boards using the MCP1700T-3002E/TT

Real designs built with the MCP1700T-3002E/TT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP1700T-3002E/TT

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP1700T-3002E/TT connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF).
  • The VIN pin has a decoupling capacitor on 6 of 9 designs, most often 1 µF (then 4.7 µF).
GNDpin 1Connected to: GND 100%
VOUTpin 2Connected to: 3.3V 78% · a signal 22%
  • Decoupling capacitor on 78% · 1 µF (7), 10 µF (1), 100 nF (1)
VINpin 3Connected to: 5V 78% · a signal 22%
  • Decoupling capacitor on 67% · 1 µF (5), 4.7 µF (1), 100 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gamma split by ahtn, Stm32 mech keyboard by julbouln, Voyager65 by foggyflute and Rf60 by emilytrau.

The MCP1700T-3002E/TT in open source designs

The gallery holds 10 open source boards using the MCP1700T-3002E/TT from 9 GitHub repositories; a typical one measures about 78.7 × 82.7 mm and carries around 127 components.

70% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Gamma split by ahtn.

Parts used alongside the MCP1700T-3002E/TT

Microcontrollers on boards using the MCP1700T-3002E/TT

What boards using the MCP1700T-3002E/TT are built for

MCP1700T-3002E/TT: common questions

Where can I find a MCP1700T-3002E/TT reference design?

Each of the 10 boards on this page is a real design using the MCP1700T-3002E/TT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP1700T-3002E/TT VOUT pin?

The VOUT pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the MCP1700T-3002E/TT.

What decoupling capacitors do designs use on the MCP1700T-3002E/TT VIN pin?

The VIN pin has a decoupling capacitor on 6 of 9 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the MCP1700T-3002E/TT.

Which microcontrollers do boards using the MCP1700T-3002E/TT use?

Most are built on STM32 (4), AVR/Arduino (3), ESP32 (2) and RISC-V (1).

How big is a typical board using the MCP1700T-3002E/TT?

The median is 78.7 × 82.7 mm, and 70% are two-layer designs.

What is the most popular open source board using the MCP1700T-3002E/TT?

By GitHub stars, Gamma split by ahtn, with 96 stars.

Can I simulate one of these boards using the MCP1700T-3002E/TT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part