4 open source boards using the MCP6001U
Real designs built with the MCP6001U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoFlight-Controller
MarkSherstan
50 × 50 mm74 parts2LMIT3
Panel daisy
ohmtech-rdi
148 × 84.5 mm20 parts2LCC-BY-SA-4.0405
Td rgbinput lm1205
tdaede
100 × 50 mm72 parts2LNo license370
Cv in
25 × 19 mm13 parts2LCC-BY-SA-4.0405
The MCP6001U in open source designs
The gallery holds 4 open source boards using the MCP6001U from 3 GitHub repositories; a typical one measures about 75 × 50 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Panel daisy by ohmtech-rdi.
Microcontrollers on boards using the MCP6001U
What boards using the MCP6001U are built for
MCP6001U: common questions
Where can I find a MCP6001U reference design?
Each of the 4 boards on this page is a real design using the MCP6001U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6001U use?
Most are built on AVR/Arduino (1).
How big is a typical board using the MCP6001U?
The median is 75 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP6001U?
By GitHub stars, Panel daisy by ohmtech-rdi, with 405 stars.
Can I simulate one of these boards using the MCP6001U before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.