4 open source boards using the MCP6004
Real designs built with the MCP6004, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32PER|FORMER eurorack sequencer
westlicht
171.5 × 106.7 mm304 parts2LCC-BY-NC-4.0109
STM32Oscar components
dchwebb
71 × 100 mm63 parts4LUnlicense38
Daisy hardware v1
rafkhan
50.5 × 128.3 mm110 parts4LNo license9
NXPLowstepper hardware
39.4 × 89.7 mm73 parts4LNo license9
The MCP6004 in open source designs
The gallery holds 4 open source boards using the MCP6004 from 3 GitHub repositories; a typical one measures about 60.8 × 103.3 mm and carries around 92 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is PER|FORMER eurorack sequencer by westlicht.
What boards using the MCP6004 are built for
MCP6004: common questions
Where can I find a MCP6004 reference design?
Each of the 4 boards on this page is a real design using the MCP6004. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6004 use?
Most are built on STM32 (2) and NXP (1).
How big is a typical board using the MCP6004?
The median is 60.8 × 103.3 mm, and 25% are two-layer designs.
What is the most popular open source board using the MCP6004?
By GitHub stars, PER|FORMER eurorack sequencer by westlicht, with 109 stars.
Can I simulate one of these boards using the MCP6004 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.