1 open source board using the MIC29300-3.3WU
Real designs built with the MIC29300-3.3WU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Spaceflight-Rocketry-Giessen-e-VThe MIC29300-3.3WU in open source designs
The gallery holds 1 open source boards using the MIC29300-3.3WU from 1 GitHub repository; a typical one measures about 133 × 79.8 mm and carries around 119 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Telemetry Groundstation Motherboard PCB by Spaceflight-Rocketry-Giessen-e-V.
What boards using the MIC29300-3.3WU are built for
MIC29300-3.3WU: common questions
Where can I find a MIC29300-3.3WU reference design?
Each of the 1 boards on this page is a real design using the MIC29300-3.3WU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the MIC29300-3.3WU?
The median is 133 × 79.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC29300-3.3WU?
By GitHub stars, Telemetry Groundstation Motherboard PCB by Spaceflight-Rocketry-Giessen-e-V, with 26 stars.
Can I simulate one of these boards using the MIC29300-3.3WU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.