2 open source boards using the SD_Card
Real designs built with the SD_Card, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoLPA-hardware
taborlab
143 × 74 mm81 parts2LNo license11
AVR/ArduinoRainGauge
ARTS-Laboratory
64 × 40.5 mm14 parts2LCC-BY-SA-4.00
The SD_Card in open source designs
The gallery holds 2 open source boards using the SD_Card from 2 GitHub repositories; a typical one measures about 103.5 × 57.3 mm and carries around 48 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is LPA-hardware by taborlab.
Microcontrollers on boards using the SD_Card
What boards using the SD_Card are built for
SD_Card: common questions
Where can I find a SD_Card reference design?
Each of the 2 boards on this page is a real design using the SD_Card. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SD_Card use?
Most are built on AVR/Arduino (2).
How big is a typical board using the SD_Card?
The median is 103.5 × 57.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the SD_Card?
By GitHub stars, LPA-hardware by taborlab, with 11 stars.
Can I simulate one of these boards using the SD_Card before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.