2 open source boards using the SN74LVC1G10DCKR

Real designs built with the SN74LVC1G10DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The SN74LVC1G10DCKR in open source designs

The gallery holds 2 open source boards using the SN74LVC1G10DCKR from 1 GitHub repository; a typical one measures about 94.8 × 65.4 mm and carries around 82 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Nescart by Keitark.

Microcontrollers on boards using the SN74LVC1G10DCKR

ESP32 2

What boards using the SN74LVC1G10DCKR are built for

SN74LVC1G10DCKR: common questions

Where can I find a SN74LVC1G10DCKR reference design?

Each of the 2 boards on this page is a real design using the SN74LVC1G10DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LVC1G10DCKR use?

Most are built on ESP32 (2).

How big is a typical board using the SN74LVC1G10DCKR?

The median is 94.8 × 65.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74LVC1G10DCKR?

By GitHub stars, Nescart by Keitark, with 0 stars.

Can I simulate one of these boards using the SN74LVC1G10DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.