2 open source boards using the TLP358
Real designs built with the TLP358, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
dancinlab
The TLP358 in open source designs
The gallery holds 2 open source boards using the TLP358 from 2 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 10 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Hexa lang by dancinlab.
Parts used alongside the TLP358
Microcontrollers on boards using the TLP358
What boards using the TLP358 are built for
TLP358: common questions
Where can I find a TLP358 reference design?
Each of the 2 boards on this page is a real design using the TLP358. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TLP358?
The AD8429ARZ, ISO224ADWVR, LTC2378-20, TPS7A4901 → +5V (mixed) and XC7A35T-1CSG324C appear in the most repositories here.
Which microcontrollers do boards using the TLP358 use?
Most are built on FPGA (2).
How big is a typical board using the TLP358?
The median is 100 × 80 mm, and 0% are two-layer designs.
What is the most popular open source board using the TLP358?
By GitHub stars, Hexa lang by dancinlab, with 196 stars.
Can I simulate one of these boards using the TLP358 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.