4 open source boards using the TLV75518PDRV
Real designs built with the TLV75518PDRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
2.5in-IDE-SSD-no lengthmatch
dosdude1
65 × 49.8 mm82 parts4LGPL-3.0332
RP2040/RP2350PS2 AIO Mainboard
tschicki
121 × 83 mm568 parts6LMIT202
Zif ide ssd
49 × 68.5 mm79 parts4LGPL-3.096
STM32Benchy2 Motherboard
Daxxn
159.5 × 105 mm951 parts8LAGPL-3.02
The TLV75518PDRV in open source designs
The gallery holds 4 open source boards using the TLV75518PDRV from 4 GitHub repositories; a typical one measures about 93 × 75.8 mm and carries around 325 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is 2.5in-IDE-SSD-no lengthmatch by dosdude1.
Parts used alongside the TLV75518PDRV
Microcontrollers on boards using the TLV75518PDRV
TLV75518PDRV: common questions
Where can I find a TLV75518PDRV reference design?
Each of the 4 boards on this page is a real design using the TLV75518PDRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV75518PDRV use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TLV75518PDRV?
The median is 93 × 75.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the TLV75518PDRV?
By GitHub stars, 2.5in-IDE-SSD-no lengthmatch by dosdude1, with 332 stars.
Can I simulate one of these boards using the TLV75518PDRV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.