4 open source boards using the TMP102
Real designs built with the TMP102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32WormControl-Relay15x5t15-ControlBoard
makerspacelt
84 × 41 mm80 parts4LCERN-OHL-S-2.00
WormControl-Relay15x5t15-PowerBoard
85.5 × 86 mm44 parts2LCERN-OHL-S-2.00- schematic only · 14 partsSTM32
Embedded twin
FionaKP
14 partsNo license0 
STM32Sense
sean618
27 × 25 mm36 parts2LMIT0
The TMP102 in open source designs
The gallery holds 4 open source boards using the TMP102 from 4 GitHub repositories; a typical one measures about 84 × 41 mm and carries around 40 components.
67% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is WormControl-Relay15x5t15-ControlBoard by makerspacelt.
What boards using the TMP102 are built for
TMP102: common questions
Where can I find a TMP102 reference design?
Each of the 4 boards on this page is a real design using the TMP102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TMP102 use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the TMP102?
The median is 84 × 41 mm, and 67% are two-layer designs.
What is the most popular open source board using the TMP102?
By GitHub stars, WormControl-Relay15x5t15-ControlBoard by makerspacelt, with 0 stars.
Can I simulate one of these boards using the TMP102 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.