4 open source boards using the TXS0108E
Real designs built with the TXS0108E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FT81x Arduino Driver
blazer82
42.8 × 36.8 mm30 parts4LMIT58
Dlr carrier
arcnode-io
120 × 105 mm89 parts4LNo license0
NXPTeensyv
english1234
100 × 100 mm74 parts2LGPL-2.068
AVR/ArduinoReflowOvenController
wangyeee
100 × 100 mm97 parts2LBSD-3-Clause9
The TXS0108E in open source designs
The gallery holds 4 open source boards using the TXS0108E from 4 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 82 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Teensyv by english1234.
Microcontrollers on boards using the TXS0108E
What boards using the TXS0108E are built for
TXS0108E: common questions
Where can I find a TXS0108E reference design?
Each of the 4 boards on this page is a real design using the TXS0108E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXS0108E use?
Most are built on AVR/Arduino (1) and NXP (1).
How big is a typical board using the TXS0108E?
The median is 100 × 100 mm, and 50% are two-layer designs.
What is the most popular open source board using the TXS0108E?
By GitHub stars, Teensyv by english1234, with 68 stars.
Can I simulate one of these boards using the TXS0108E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.