4 open source boards using the XC3S200A-4VQG100C
Real designs built with the XC3S200A-4VQG100C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAFujiflex
mackieks
27.7 × 43.7 mm24 parts2LSHL-2.140
FPGAMain jig
51.3 × 48.2 mm21 parts2LSHL-2.140
FPGATypeA
20.8 × 26.5 mm5 parts2LSHL-2.140
FPGATypeC
17 × 21.3 mm5 parts2LSHL-2.140
The XC3S200A-4VQG100C in open source designs
The gallery holds 4 open source boards using the XC3S200A-4VQG100C from 1 GitHub repository; a typical one measures about 24.2 × 35.1 mm and carries around 13 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Fujiflex by mackieks.
Microcontrollers on boards using the XC3S200A-4VQG100C
XC3S200A-4VQG100C: common questions
Where can I find a XC3S200A-4VQG100C reference design?
Each of the 4 boards on this page is a real design using the XC3S200A-4VQG100C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XC3S200A-4VQG100C use?
Most are built on FPGA (4).
How big is a typical board using the XC3S200A-4VQG100C?
The median is 24.2 × 35.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the XC3S200A-4VQG100C?
By GitHub stars, Fujiflex by mackieks, with 40 stars.
Can I simulate one of these boards using the XC3S200A-4VQG100C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.