1 open source board using the XC7A200T-1FFG1156C
Real designs built with the XC7A200T-1FFG1156C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
azonenbergThe XC7A200T-1FFG1156C in open source designs
The gallery holds 1 open source boards using the XC7A200T-1FFG1156C from 1 GitHub repository; a typical one measures about 167.1 × 100 mm and carries around 798 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Marblewalrus switch by azonenberg.
Microcontrollers on boards using the XC7A200T-1FFG1156C
XC7A200T-1FFG1156C: common questions
Where can I find a XC7A200T-1FFG1156C reference design?
Each of the 1 boards on this page is a real design using the XC7A200T-1FFG1156C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XC7A200T-1FFG1156C use?
Most are built on FPGA (1).
How big is a typical board using the XC7A200T-1FFG1156C?
The median is 167.1 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the XC7A200T-1FFG1156C?
By GitHub stars, Marblewalrus switch by azonenberg, with 124 stars.
Can I simulate one of these boards using the XC7A200T-1FFG1156C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.