5 open source boards using the RY8310
Real designs built with the RY8310, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esplog hv
VladimirP1
16.6 × 11.8 mm25 parts2LNo license5RISC-V
CCController
RainbowLabsDE
180 × 80 mm79 parts2LMIT4RP2040/RP2350
FZburner mod toolboard
wuyoutech
52 × 36 mm58 parts4LGPL-3.00RISC-V
StripController
RainbowLabsDE
40 × 60 mm63 parts2LMIT4ESP32
SensactHsNano3
klaus-liebler
90 × 56 mm122 parts2LApache-2.04
The RY8310 in open source designs
The gallery holds 5 open source boards using the RY8310 from 4 GitHub repositories; a typical one measures about 52 × 56 mm and carries around 63 components.
80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Esplog hv by VladimirP1.
Microcontrollers on boards using the RY8310
What boards using the RY8310 are built for
RY8310: common questions
Where can I find a RY8310 reference design?
Each of the 5 boards on this page is a real design using the RY8310. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RY8310 use?
Most are built on ESP32 (2), RISC-V (2) and RP2040/RP2350 (1).
How big is a typical board using the RY8310?
The median is 52 × 56 mm, and 80% are two-layer designs.
What is the most popular open source board using the RY8310?
By GitHub stars, Esplog hv by VladimirP1, with 5 stars.
Can I simulate one of these boards using the RY8310 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.