4 open source boards using the 1
Real designs built with the 1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Wakame keyboard
Cacaomeme
293 × 120 mm354 parts2LNo license0STM32
G431rapidtrigger
Cacaomeme
100 × 100 mm90 parts2LNo license0RP2040/RP2350
MacroPad Controller Board
loredavid
70 × 50.5 mm29 parts2LCERN-OHL-S-2.01Valhalla-MOD-XVR RS485
csdexter
76.2 × 50.8 mm16 parts2LGPL-3.00
The 1 in open source designs
The gallery holds 4 open source boards using the 1 from 4 GitHub repositories; a typical one measures about 88.1 × 75.4 mm and carries around 60 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is MacroPad Controller Board by loredavid.
Parts used alongside the 1
Microcontrollers on boards using the 1
What boards using the 1 are built for
1: common questions
Where can I find a 1 reference design?
Each of the 4 boards on this page is a real design using the 1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 1?
The 2, 3 and AH49FNTR-G1 appear in the most repositories here.
Which microcontrollers do boards using the 1 use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the 1?
The median is 88.1 × 75.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the 1?
By GitHub stars, MacroPad Controller Board by loredavid, with 1 stars.
Can I simulate one of these boards using the 1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.