5 open source boards using the 24AA01
Real designs built with the 24AA01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mppt-2420-lc
LibreSolar
114.5 × 60.5 mm141 partsCC-BY-SA-4.0233STM32
BMS-5s
LibreSolar
108 × 57.5 mm150 parts2LCC-BY-SA-4.048STM32
MPPT-Charger 20A
AJEngineering
114.5 × 60.5 mm141 partsCC-BY-SA-4.04STM32
Woodchuck
cuspaceflight
58 × 35 mm38 parts2LMIT0Standalone Com Shield
TheOpenBMS
64.8 × 71.1 mm51 parts2LNo license1
How designs wire the 24AA01
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 24AA01 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 is tied to GND on 5 of 5 designs.
- Pin 4 is tied to 3.3V on 5 of 5 designs.
- Pin 5 is tied to GND on 5 of 5 designs.
- Pin 1 has a pull-up to 3.3V on 4 of 5 designs, most often 2.2 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: The microcontroller 80% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: The microcontroller 80% |
|
| Pin 4 | Connected to: 3.3V 100% |
|
| Pin 5 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mppt-2420-lc by LibreSolar, BMS-5s by LibreSolar, MPPT-Charger 20A by AJEngineering and Standalone Com Shield by TheOpenBMS.
The 24AA01 in open source designs
The gallery holds 5 open source boards using the 24AA01 from 5 GitHub repositories; a typical one measures about 108 × 60.5 mm and carries around 141 components.
100% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Mppt-2420-lc by LibreSolar.
Parts used alongside the 24AA01
Microcontrollers on boards using the 24AA01
What boards using the 24AA01 are built for
24AA01: common questions
Where can I find a 24AA01 reference design?
Each of the 5 boards on this page is a real design using the 24AA01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 24AA01 pin 2 connected?
Pin 2 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24AA01.
How is the 24AA01 pin 4 connected?
Pin 4 is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24AA01.
How is the 24AA01 pin 5 connected?
Pin 5 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24AA01.
What parts are used alongside the 24AA01?
The AP2210-3.3, STM32F072CB, TJA1042T-3, AZ1117 and LM258 appear in the most repositories here.
Which microcontrollers do boards using the 24AA01 use?
Most are built on STM32 (4).
How big is a typical board using the 24AA01?
The median is 108 × 60.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the 24AA01?
By GitHub stars, Mppt-2420-lc by LibreSolar, with 233 stars.
Can I simulate one of these boards using the 24AA01 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.