3 open source boards using the 24C32
Real designs built with the 24C32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kimchi micro
groupgets
65 × 32 mm291 parts8LCERN-OHL-S-2.0129STM32
Mainboard
sbstnh
139 × 190 mm245 parts2LBSD-3-Clause64Kimchi-HiFi lid
adamjvr
65 × 45.4 mm44 parts4LNo license1
The 24C32 in open source designs
The gallery holds 3 open source boards using the 24C32 from 3 GitHub repositories; a typical one measures about 65 × 45.4 mm and carries around 245 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Kimchi micro by groupgets.
Microcontrollers on boards using the 24C32
What boards using the 24C32 are built for
24C32: common questions
Where can I find a 24C32 reference design?
Each of the 3 boards on this page is a real design using the 24C32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 24C32 use?
Most are built on STM32 (1).
How big is a typical board using the 24C32?
The median is 65 × 45.4 mm, and 33% are two-layer designs.
What is the most popular open source board using the 24C32?
By GitHub stars, Kimchi micro by groupgets, with 129 stars.
Can I simulate one of these boards using the 24C32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.