3 open source boards using the 27C400
Real designs built with the 27C400, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
27c400-ff amstrad
keirf
99.1 × 99.7 mm34 parts2LCC0-1.0107RP2040/RP2350
C64 & VIC20 Flash Programmer Dave Gaunt
dgaunt48
100 × 100 mm80 parts2LNo license027c400-amstrad-2up
keirf
99.1 × 99.7 mm4 parts2LCC0-1.0107
The 27C400 in open source designs
The gallery holds 3 open source boards using the 27C400 from 2 GitHub repositories; a typical one measures about 99.1 × 99.7 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is 27c400-ff amstrad by keirf.
Microcontrollers on boards using the 27C400
What boards using the 27C400 are built for
27C400: common questions
Where can I find a 27C400 reference design?
Each of the 3 boards on this page is a real design using the 27C400. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 27C400 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the 27C400?
The median is 99.1 × 99.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the 27C400?
By GitHub stars, 27c400-ff amstrad by keirf, with 107 stars.
Can I simulate one of these boards using the 27C400 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.