2 open source boards using the 29F010
Real designs built with the 29F010, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FlashROM 100
bkw777
35.6 × 17.8 mm6 parts2LCC-BY-SA-4.031
FlashROM 100 TSOP
35.6 × 17.8 mm6 parts2LCC-BY-SA-4.031
The 29F010 in open source designs
The gallery holds 2 open source boards using the 29F010 from 1 GitHub repository; a typical one measures about 35.6 × 17.8 mm and carries around 6 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is FlashROM 100 by bkw777.
What boards using the 29F010 are built for
29F010: common questions
Where can I find a 29F010 reference design?
Each of the 2 boards on this page is a real design using the 29F010. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the 29F010?
The median is 35.6 × 17.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the 29F010?
By GitHub stars, FlashROM 100 by bkw777, with 31 stars.
Can I simulate one of these boards using the 29F010 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.