6 open source boards using the 74141

Real designs built with the 74141, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74141

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74141 connects to, and the resistors, capacitors and other passives placed on it.

VCCpin 5Connected to: VCC 80% · a signal 20%
GNDpin 12Connected to: GND 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NixieClock by gztproject, Nixie-Clock: Controller by konradmoesch, NixieClockV1 by davidmcq137 and Nixie-2.1 by jhrg.

The 74141 in open source designs

The gallery holds 6 open source boards using the 74141 from 5 GitHub repositories; a typical one measures about 164.8 × 97.6 mm and carries around 63 components.

83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is NixieClock by gztproject.

Parts used alongside the 74141

Microcontrollers on boards using the 74141

What boards using the 74141 are built for

74141: common questions

Where can I find a 74141 reference design?

Each of the 6 boards on this page is a real design using the 74141. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 74141 use?

Most are built on AVR/Arduino (1), ESP32 (1), ESP8266 (1) and STM32 (1).

How big is a typical board using the 74141?

The median is 164.8 × 97.6 mm, and 83% are two-layer designs.

What is the most popular open source board using the 74141?

By GitHub stars, NixieClock by gztproject, with 3 stars.

Can I simulate one of these boards using the 74141 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part