2 open source boards using the 74AC20

Real designs built with the 74AC20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The 74AC20 in open source designs

The gallery holds 2 open source boards using the 74AC20 from 2 GitHub repositories; a typical one measures about 160.1 × 125.1 mm and carries around 138 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is OtterX by RetroRemake.

Microcontrollers on boards using the 74AC20

What boards using the 74AC20 are built for

74AC20: common questions

Where can I find a 74AC20 reference design?

Each of the 2 boards on this page is a real design using the 74AC20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 74AC20 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74AC20?

The median is 160.1 × 125.1 mm, and 0% are two-layer designs.

What is the most popular open source board using the 74AC20?

By GitHub stars, OtterX by RetroRemake, with 40 stars.

Can I simulate one of these boards using the 74AC20 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part