10 open source boards using the 74AHC541
Real designs built with the 74AHC541, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
DevRamCart RevA
Danjovic
100 × 64.7 mm37 parts2LGPL-2.043ESP32
DevRam
Danjovic
100 × 64.7 mm36 parts2LGPL-2.043Vga cpld jtag
scefrom
223.5 × 147.3 mm122 parts2LCustom license2Vga cpld
scefrom
223.5 × 147.3 mm116 parts2LCustom license2AND8bit
Tert2
100 × 100 mm61 parts2LNo license0Vga cpld fctlines
scefrom
223.5 × 147.3 mm99 parts2LCustom license2Vga cpld jtag fctlines
scefrom
223.5 × 147.3 mm99 parts2LCustom license2MyCPU VGA
Synthron
83.3 × 68.2 mm19 parts4LNo license2LPT
Synthron
83.3 × 68.2 mm18 parts4LNo license2Clock
AJain9199
46 × 39 mm35 parts2LNo license1
How designs wire the 74AHC541
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74AHC541 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- The Y7 pin has a series resistor on 2 of 5 designs, most often 33 Ω (then 220 Ω).
- The Y6 pin has a series resistor on 2 of 5 designs, most often 33 Ω.
- The Y5 pin has a series resistor on 2 of 5 designs, most often 33 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| Y7pin 11 | Connected to: 74AHC541 40%, a connector 40% |
|
| Y6pin 12 | Connected to: 74AHC541 40%, a connector 40% |
|
| Y5pin 13 | Connected to: 74AHC541 40%, a connector 40% |
|
| Y4pin 14 | Connected to: 74AHC541 40%, a connector 40% |
|
| Y3pin 15 | Connected to: 74AHC541 40%, a connector 40% |
|
| Y2pin 16 | Connected to: A connector 60%, 74AHC541 40% |
|
| Y1pin 17 | Connected to: A connector 60%, 74AHC541 40% |
|
| Y0pin 18 | Connected to: A connector 60%, 74AHC541 40% |
|
| VCCpin 20 | Connected to: 5V 100% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DevRam by Danjovic, Vga cpld by scefrom, LPT by Synthron and Clock by AJain9199.
The 74AHC541 in open source designs
The gallery holds 10 open source boards using the 74AHC541 from 5 GitHub repositories; a typical one measures about 100 × 84.1 mm and carries around 49 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is DevRamCart RevA by Danjovic.
Microcontrollers on boards using the 74AHC541
What boards using the 74AHC541 are built for
74AHC541: common questions
Where can I find a 74AHC541 reference design?
Each of the 10 boards on this page is a real design using the 74AHC541. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC541 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74AHC541.
What resistor goes on the 74AHC541 Y7 pin?
The Y7 pin has a series resistor on 2 of 5 designs, most often 33 Ω (then 220 Ω). Counted from the KiCad layouts of 5 open source designs using the 74AHC541.
What resistor goes on the 74AHC541 Y6 pin?
The Y6 pin has a series resistor on 2 of 5 designs, most often 33 Ω. Counted from the KiCad layouts of 5 open source designs using the 74AHC541.
Which microcontrollers do boards using the 74AHC541 use?
Most are built on ESP32 (2).
How big is a typical board using the 74AHC541?
The median is 100 × 84.1 mm, and 80% are two-layer designs.
What is the most popular open source board using the 74AHC541?
By GitHub stars, DevRamCart RevA by Danjovic, with 43 stars.
Can I simulate one of these boards using the 74AHC541 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.