6 open source boards using the 74HC240
Real designs built with the 74HC240, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mixer
arneman44
110.5 × 114.3 mm99 parts2LNo license0CPC464-2MINIDDI
Board-Folk
93.4 × 80.2 mm59 parts2LNo license10MinimalZ80
89Mods
132.6 × 60.5 mm34 parts2LMIT3Retro stack debug
gcoonrod
99.1 × 99.1 mm35 parts2LApache-2.00Z80-IDE
dennis9819
160 × 100.3 mm62 parts2LNo license2Z80-SID
dennis9819
160 × 100.3 mm62 parts2LNo license2
How designs wire the 74HC240
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC240 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The 2Y0 pin has a series resistor on 2 of 5 designs, most often 680 Ω.
- The 1A1 pin has a pull-up to 5V on 2 of 5 designs, most often 680 Ω (then 10 kΩ).
- The 1A2 pin has a series resistor on 2 of 5 designs, most often 150 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 2Y0pin 3 | Connected to: Signal 100% |
|
| 1A1pin 4 | Connected to: A connector 80% |
|
| 1A2pin 6 | Connected to: A connector 40% |
|
| GNDpin 10 | Connected to: GND 100% | — |
| 2A3pin 11 | Connected to: A connector 80% |
|
| VCCpin 20 | Connected to: 5V 80% · a signal 20% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CPC464-2MINIDDI by Board-Folk, MinimalZ80 by 89Mods, Z80-IDE by dennis9819 and Mixer by arneman44.
The 74HC240 in open source designs
The gallery holds 6 open source boards using the 74HC240 from 5 GitHub repositories; a typical one measures about 121.5 × 99.7 mm and carries around 61 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is CPC464-2MINIDDI by Board-Folk.
Parts used alongside the 74HC240
What boards using the 74HC240 are built for
74HC240: common questions
Where can I find a 74HC240 reference design?
Each of the 6 boards on this page is a real design using the 74HC240. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC240 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74HC240.
What resistor goes on the 74HC240 2Y0 pin?
The 2Y0 pin has a series resistor on 2 of 5 designs, most often 680 Ω. Counted from the KiCad layouts of 5 open source designs using the 74HC240.
What pull-up resistor is used on the 74HC240 1A1 pin?
The 1A1 pin has a pull-up to 5V on 2 of 5 designs, most often 680 Ω (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74HC240.
How big is a typical board using the 74HC240?
The median is 121.5 × 99.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74HC240?
By GitHub stars, CPC464-2MINIDDI by Board-Folk, with 10 stars.
Can I simulate one of these boards using the 74HC240 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.