6 open source boards using the 74HC74D,653

Real designs built with the 74HC74D,653, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74HC74D,653

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HC74D,653 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_14 pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
  • The 1Q# pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The 2Q# pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The 2Q_9 pin is left unconnected on 4 of 6 designs (a signal on 2).
1CPpin 3Connected to: 74HC14D,653 50%
  • Series resistor on 50% · 0 Ω (1), 22 kΩ (1), 100 Ω (1)
1Q_5pin 5Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 100 Ω (1), 10 kΩ (1)
1Q#pin 6Connected to: Not connected 67% · a signal 33%
GND_7pin 7Connected to: GND 100%
2Q#pin 8Connected to: Not connected 67% · a signal 33%
2Q_9pin 9Connected to: Not connected 67% · a signal 33%
2CPpin 11Connected to: Signal 67% · not connected 17% · GND 17%
  • Series resistor on 33% · 22 kΩ (1), 100 Ω (1)
VCC_14pin 14Connected to: 5V 83% · a signal 17%
  • Decoupling capacitor on 67% · 100 nF (7)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tangenta by vmetodiev, Arpeggiator by EwoudVV, RF80 V1R1 - STANDARD JLCPCB EVALUATION CANDIDATE by DD1SB and PCB IMD-AMS LATCH by EVR-Tuiasi.

The 74HC74D,653 in open source designs

The gallery holds 6 open source boards using the 74HC74D,653 from 6 GitHub repositories; a typical one measures about 190 × 135 mm and carries around 334 components.

50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Tangenta by vmetodiev.

Microcontrollers on boards using the 74HC74D,653

What boards using the 74HC74D,653 are built for

74HC74D,653: common questions

Where can I find a 74HC74D,653 reference design?

Each of the 6 boards on this page is a real design using the 74HC74D,653. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC74D,653 VCC_14 pin?

The VCC_14 pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74HC74D,653.

How is the 74HC74D,653 1Q# pin connected?

The 1Q# pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74HC74D,653.

How is the 74HC74D,653 2Q# pin connected?

The 2Q# pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74HC74D,653.

What parts are used alongside the 74HC74D,653?

The 74HC14D,653, 74HC00D,653, 74HC04D,653, 74HC08D,653 and Si5351A-B-GT appear in the most repositories here.

Which microcontrollers do boards using the 74HC74D,653 use?

Most are built on ESP32 (1).

How big is a typical board using the 74HC74D,653?

The median is 190 × 135 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74HC74D,653?

By GitHub stars, Tangenta by vmetodiev, with 5 stars.

Can I simulate one of these boards using the 74HC74D,653 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part