17 open source boards using the 74HC14D,653
Real designs built with the 74HC14D,653, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Arpeggiator
EwoudVV
220 × 170 mm350 parts2LNo license1ESP32
Universal-Poofer-Control
NOVA-Cluster
200 × 160 mm577 parts4LNo license0After
DD1SB
180 × 140 mm287 parts2LMIT0RP2040/RP2350
Control board
TrendBit
56 × 85 mm210 parts4LGPL-3.00ESP32
ElevatorLift
Nickster44
90 × 90 mm113 parts4LNo license0Needforheat p1-base hardware
energiegedrag-nl
51 × 36 mm22 parts2LCERN-OHL-P-2.00Needforheat p1-base hardware
energietransitie
51 × 36 mm22 parts2LCERN-OHL-P-2.00Before
DD1SB
180 × 140 mm287 parts2LMIT0Dfm-2oz
DD1SB
180 × 140 mm287 parts2LMIT0Dfm special finish
DD1SB
180 × 140 mm287 parts2LMIT0E2-native
DD1SB
180 × 140 mm287 parts2LMIT0E4-native
DD1SB
180 × 140 mm287 parts2LMIT0E4R1-baseline
DD1SB
180 × 140 mm287 parts2LMIT0RF2M
DD1SB
150 × 110 mm287 parts2LMIT0Sliver only
DD1SB
180 × 140 mm287 parts2LMIT0Strict before
DD1SB
180 × 140 mm287 parts2LMIT0RF80 V1R1 - STANDARD JLCPCB EVALUATION CANDIDATE
DD1SB
150 × 110 mm199 parts2LMIT0
How designs wire the 74HC14D,653
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HC14D,653 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
- The 1A pin has a pull-up to VCC on 4 of 7 designs, most often 1 kΩ (then 10 kΩ).
- The 4A pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 2.2 kΩ).
- The 4A pin has a capacitor to GND on 3 of 7 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: A connector 43% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| 4Apin 9 | Connected to: Signal 57% · not connected 29% |
|
| 5Apin 11 | Connected to: Signal 57% · not connected 29% |
|
| 6Apin 13 | Connected to: Signal 43% · not connected 29% · GND 29% |
|
| VCCpin 14 | Connected to: 3.3V 86% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arpeggiator by EwoudVV, After by DD1SB, Needforheat p1-base hardware by energiegedrag-nl and Needforheat p1-base hardware by energietransitie.
The 74HC14D,653 in open source designs
The gallery holds 17 open source boards using the 74HC14D,653 from 7 GitHub repositories; a typical one measures about 180 × 140 mm and carries around 287 components.
82% are two-layer designs, the rest use four layers or more, and 82% carry an open source license.
The most starred is Arpeggiator by EwoudVV.
Parts used alongside the 74HC14D,653
Microcontrollers on boards using the 74HC14D,653
What boards using the 74HC14D,653 are built for
74HC14D,653: common questions
Where can I find a 74HC14D,653 reference design?
Each of the 17 boards on this page is a real design using the 74HC14D,653. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC14D,653 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74HC14D,653.
What pull-up resistor is used on the 74HC14D,653 1A pin?
The 1A pin has a pull-up to VCC on 4 of 7 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the 74HC14D,653.
What resistor goes on the 74HC14D,653 4A pin?
The 4A pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the 74HC14D,653.
What parts are used alongside the 74HC14D,653?
The 74HC74D,653, 74HC00D,653, 74HC08D,653, 74HC32D,653 and EL357N-G appear in the most repositories here.
Which microcontrollers do boards using the 74HC14D,653 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the 74HC14D,653?
The median is 180 × 140 mm, and 82% are two-layer designs.
What is the most popular open source board using the 74HC14D,653?
By GitHub stars, Arpeggiator by EwoudVV, with 1 stars.
Can I simulate one of these boards using the 74HC14D,653 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.