2 open source boards using the 74LS37

Real designs built with the 74LS37, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The 74LS37 in open source designs

The gallery holds 2 open source boards using the 74LS37 from 2 GitHub repositories; a typical one measures about 54.9 × 73.7 mm and carries around 33 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Northstar PIO by abzman.

Parts used alongside the 74LS37

74LS37: common questions

Where can I find a 74LS37 reference design?

Each of the 2 boards on this page is a real design using the 74LS37. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LS37?

The 74LS138, 74LS32 and 74LS74 appear in the most repositories here.

How big is a typical board using the 74LS37?

The median is 54.9 × 73.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS37?

By GitHub stars, Northstar PIO by abzman, with 4 stars.

Can I simulate one of these boards using the 74LS37 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part