2 open source boards using the 74LVC06
Real designs built with the 74LVC06, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ISA FPGA v2
robfinch
223.3 × 120.1 mm104 parts4LNo license78RP2040/RP2350
Karabas go
andykarpov
101.6 × 147.3 mm279 parts4LCC-BY-NC-4.02
The 74LVC06 in open source designs
The gallery holds 2 open source boards using the 74LVC06 from 2 GitHub repositories; a typical one measures about 162.4 × 133.7 mm and carries around 192 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is ISA FPGA v2 by robfinch.
Microcontrollers on boards using the 74LVC06
74LVC06: common questions
Where can I find a 74LVC06 reference design?
Each of the 2 boards on this page is a real design using the 74LVC06. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74LVC06 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the 74LVC06?
The median is 162.4 × 133.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the 74LVC06?
By GitHub stars, ISA FPGA v2 by robfinch, with 78 stars.
Can I simulate one of these boards using the 74LVC06 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.