7 open source boards using the 74LVC573
Real designs built with the 74LVC573, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ISA FPGA v2
robfinch
223.3 × 120.1 mm104 parts4LNo license78ISA65816
robfinch
223.3 × 120.1 mm69 parts4LNo license78ISA65816a
robfinch
223.3 × 120.1 mm69 parts4LNo license78S100 Z80 V5
CatspersCoffee
254 × 134.6 mm138 partsCustom license0S100 80386 SRAM V6
CatspersCoffee
254 × 134.6 mm98 partsCustom license0VGAVDG
flypie
270.5 × 147.3 mm85 parts2LGPL-3.013VGAGAL
flypie
160 × 114.3 mm75 parts2LGPL-3.013
The 74LVC573 in open source designs
The gallery holds 7 open source boards using the 74LVC573 from 3 GitHub repositories; a typical one measures about 223.3 × 120.1 mm and carries around 85 components.
60% use four copper layers or more, and 29% carry an open source license.
The most starred is ISA FPGA v2 by robfinch.
Parts used alongside the 74LVC573
What boards using the 74LVC573 are built for
74LVC573: common questions
Where can I find a 74LVC573 reference design?
Each of the 7 boards on this page is a real design using the 74LVC573. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the 74LVC573?
The median is 223.3 × 120.1 mm, and 40% are two-layer designs.
What is the most popular open source board using the 74LVC573?
By GitHub stars, ISA FPGA v2 by robfinch, with 78 stars.
Can I simulate one of these boards using the 74LVC573 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.