8 open source boards using the AAT1217ICA-3.3-T1
Real designs built with the AAT1217ICA-3.3-T1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Sympetrum V2
borgel
98.8 × 77.4 mm60 partsMIT28
ESP32Panel admin-27-white
disobeyfi
250 × 258 mm48 parts2LGPL-3.01
STM32Sympetrum v2 NFF1.1
40 × 80 mm49 partsMIT28
ESP32Panel artist-27-purple
250 × 258 mm48 parts2LGPL-3.01
STM32Sympetrum v2 NFF1
50 × 50 mm45 partsMIT28
ESP32Panel hacker-14-black
250 × 258 mm48 parts2LGPL-3.01
ESP32Panel support-52-blue
250 × 258 mm48 parts2LGPL-3.01
ESP32Panel user-230-red
250 × 258 mm48 parts2LGPL-3.01
The AAT1217ICA-3.3-T1 in open source designs
The gallery holds 8 open source boards using the AAT1217ICA-3.3-T1 from 2 GitHub repositories; a typical one measures about 250 × 258 mm and carries around 48 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Sympetrum V2 by borgel.
What boards using the AAT1217ICA-3.3-T1 are built for
AAT1217ICA-3.3-T1: common questions
Where can I find a AAT1217ICA-3.3-T1 reference design?
Each of the 8 boards on this page is a real design using the AAT1217ICA-3.3-T1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AAT1217ICA-3.3-T1 use?
Most are built on ESP32 (5) and STM32 (3).
How big is a typical board using the AAT1217ICA-3.3-T1?
The median is 250 × 258 mm, and 100% are two-layer designs.
What is the most popular open source board using the AAT1217ICA-3.3-T1?
By GitHub stars, Sympetrum V2 by borgel, with 28 stars.
Can I simulate one of these boards using the AAT1217ICA-3.3-T1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.