5 open source boards using the ACS711xEXLT-15AB

Real designs built with the ACS711xEXLT-15AB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The ACS711xEXLT-15AB in open source designs

The gallery holds 5 open source boards using the ACS711xEXLT-15AB from 3 GitHub repositories; a typical one measures about 49.5 × 49.9 mm and carries around 113 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is ESC v2 by 22060.

Parts used alongside the ACS711xEXLT-15AB

Microcontrollers on boards using the ACS711xEXLT-15AB

ACS711xEXLT-15AB: common questions

Where can I find a ACS711xEXLT-15AB reference design?

Each of the 5 boards on this page is a real design using the ACS711xEXLT-15AB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ACS711xEXLT-15AB?

The AMS1117-3.3, BD4104 and STM32G431CBUx appear in the most repositories here.

Which microcontrollers do boards using the ACS711xEXLT-15AB use?

Most are built on STM32 (5).

How big is a typical board using the ACS711xEXLT-15AB?

The median is 49.5 × 49.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the ACS711xEXLT-15AB?

By GitHub stars, ESC v2 by 22060, with 0 stars.

Can I simulate one of these boards using the ACS711xEXLT-15AB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part