4 open source boards using the Adafruit_HUZZAH_ESP8266_breakout
Real designs built with the Adafruit_HUZZAH_ESP8266_breakout, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Spinner
kangasp
123 × 123 mm83 parts2LNo license1
Mqtt thermocouple
uw-madison-chem-shops
91.4 × 66 mm33 parts2LCERN-OHL-P-2.01
AVR/ArduinoMqtt particle sensor
91.4 × 66 mm24 parts2LNo license1
Mqtt weather station
91.4 × 66 mm23 parts2LCERN-OHL-P-2.01
The Adafruit_HUZZAH_ESP8266_breakout in open source designs
The gallery holds 4 open source boards using the Adafruit_HUZZAH_ESP8266_breakout from 4 GitHub repositories; a typical one measures about 91.4 × 66 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Spinner by kangasp.
Parts used alongside the Adafruit_HUZZAH_ESP8266_breakout
Microcontrollers on boards using the Adafruit_HUZZAH_ESP8266_breakout
What boards using the Adafruit_HUZZAH_ESP8266_breakout are built for
Adafruit_HUZZAH_ESP8266_breakout: common questions
Where can I find a Adafruit_HUZZAH_ESP8266_breakout reference design?
Each of the 4 boards on this page is a real design using the Adafruit_HUZZAH_ESP8266_breakout. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Adafruit_HUZZAH_ESP8266_breakout use?
Most are built on AVR/Arduino (1).
How big is a typical board using the Adafruit_HUZZAH_ESP8266_breakout?
The median is 91.4 × 66 mm, and 100% are two-layer designs.
What is the most popular open source board using the Adafruit_HUZZAH_ESP8266_breakout?
By GitHub stars, Spinner by kangasp, with 1 stars.
Can I simulate one of these boards using the Adafruit_HUZZAH_ESP8266_breakout before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.