5 open source boards using the CD4060BM96
Real designs built with the CD4060BM96, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mqtt thermocouple
uw-madison-chem-shops
91.4 × 66 mm33 parts2LCERN-OHL-P-2.01AVR/Arduino
Mqtt particle sensor
uw-madison-chem-shops
91.4 × 66 mm24 parts2LNo license1Mqtt weather station
uw-madison-chem-shops
91.4 × 66 mm23 parts2LCERN-OHL-P-2.01LogicICClock
nanamitm
96 × 75.8 mm96 parts2LNo license0ELARA two bucket PSU
MatejGomboc
150 × 90 mm99 parts2LCERN-OHL-W-2.05
How designs wire the CD4060BM96
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CD4060BM96 connects to, and the resistors, capacitors and other passives placed on it.
- The CLK_0 pin has a series resistor on 5 of 5 designs, most often 470 kΩ (then 100 kΩ).
- The CLK_1 pin has a series resistor on 5 of 5 designs, most often 1 MΩ (then 10 MΩ).
- The Q12 pin is left unconnected on 5 of 5 designs.
- The Q13 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q12pin 1 | Connected to: Not connected 100% | — |
| Q13pin 2 | Connected to: Not connected 100% | — |
| Q14pin 3 | Connected to: Signal 100% |
|
| Q6pin 4 | Connected to: Not connected 100% | — |
| Q5pin 5 | Connected to: Not connected 100% | — |
| Q7pin 6 | Connected to: Not connected 100% | — |
| Q4pin 7 | Connected to: Not connected 100% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| CLK_0-1pin 9 | Connected to: Signal 80% · not connected 20% |
|
| CLK_0pin 10 | Connected to: Signal 100% |
|
| CLK_1pin 11 | Connected to: Signal 100% |
|
| RSTpin 12 | Connected to: Signal 80% · GND 20% |
|
| Q9pin 13 | Connected to: Not connected 100% | — |
| Q8pin 14 | Connected to: Not connected 100% | — |
| Q10pin 15 | Connected to: Not connected 100% | — |
| VDDpin 16 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ELARA two bucket PSU by MatejGomboc, Mqtt particle sensor by uw-madison-chem-shops, Mqtt thermocouple by uw-madison-chem-shops and Mqtt weather station by uw-madison-chem-shops.
The CD4060BM96 in open source designs
The gallery holds 5 open source boards using the CD4060BM96 from 5 GitHub repositories; a typical one measures about 91.4 × 66 mm and carries around 33 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is ELARA two bucket PSU by MatejGomboc.
Parts used alongside the CD4060BM96
Microcontrollers on boards using the CD4060BM96
What boards using the CD4060BM96 are built for
CD4060BM96: common questions
Where can I find a CD4060BM96 reference design?
Each of the 5 boards on this page is a real design using the CD4060BM96. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the CD4060BM96 CLK_0 pin?
The CLK_0 pin has a series resistor on 5 of 5 designs, most often 470 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the CD4060BM96.
What resistor goes on the CD4060BM96 CLK_1 pin?
The CLK_1 pin has a series resistor on 5 of 5 designs, most often 1 MΩ (then 10 MΩ). Counted from the KiCad layouts of 5 open source designs using the CD4060BM96.
How is the CD4060BM96 Q12 pin connected?
The Q12 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4060BM96.
Which microcontrollers do boards using the CD4060BM96 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the CD4060BM96?
The median is 91.4 × 66 mm, and 100% are two-layer designs.
What is the most popular open source board using the CD4060BM96?
By GitHub stars, ELARA two bucket PSU by MatejGomboc, with 5 stars.
Can I simulate one of these boards using the CD4060BM96 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.