5 open source boards using the ADAFRUIT_QT_PY

Real designs built with the ADAFRUIT_QT_PY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the ADAFRUIT_QT_PY

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADAFRUIT_QT_PY connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3 pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
  • The A0 pin is left unconnected on 3 of 5 designs (a signal on 2).
GNDpin 2Connected to: GND 60% · not connected 20% · a signal 20%
3V3pin 3Connected to: 3.3V 60% · a signal 40%
A0pin 14Connected to: Not connected 60% · a signal 40%

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kinethreads by FIGLAB, Mux board v3 by charkster, Mux board v5 by charkster and Xiao rp2040 level shifter v1 by charkster.

The ADAFRUIT_QT_PY in open source designs

The gallery holds 5 open source boards using the ADAFRUIT_QT_PY from 5 GitHub repositories; a typical one measures about 33 × 53.7 mm and carries around 14 components.

100% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Kinethreads by FIGLAB.

Parts used alongside the ADAFRUIT_QT_PY

ADAFRUIT_QT_PY: common questions

Where can I find a ADAFRUIT_QT_PY reference design?

Each of the 5 boards on this page is a real design using the ADAFRUIT_QT_PY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ADAFRUIT_QT_PY 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the ADAFRUIT_QT_PY.

How is the ADAFRUIT_QT_PY A0 pin connected?

The A0 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the ADAFRUIT_QT_PY.

How big is a typical board using the ADAFRUIT_QT_PY?

The median is 33 × 53.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the ADAFRUIT_QT_PY?

By GitHub stars, Kinethreads by FIGLAB, with 17 stars.

Can I simulate one of these boards using the ADAFRUIT_QT_PY before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part