2 open source boards using the ADC141S626

Real designs built with the ADC141S626, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ADC141S626 in open source designs

The gallery holds 2 open source boards using the ADC141S626 from 2 GitHub repositories; a typical one measures about 85 × 87 mm and carries around 119 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Guitar pedal by herculanodavi.

Parts used alongside the ADC141S626

Microcontrollers on boards using the ADC141S626

What boards using the ADC141S626 are built for

ADC141S626: common questions

Where can I find a ADC141S626 reference design?

Each of the 2 boards on this page is a real design using the ADC141S626. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADC141S626 use?

Most are built on STM32 (2).

How big is a typical board using the ADC141S626?

The median is 85 × 87 mm, and 0% are two-layer designs.

What is the most popular open source board using the ADC141S626?

By GitHub stars, Guitar pedal by herculanodavi, with 0 stars.

Can I simulate one of these boards using the ADC141S626 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part