5 open source boards using the ADP151AUJZ-3.3-R7
Real designs built with the ADP151AUJZ-3.3-R7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Driver
thewonderidiot
228.6 × 110.7 mm678 parts6LMIT4- schematic only · 72 parts
Bone conductor
sharebrained
72 partsGPL-2.01 
AVR/ArduinoMaster
cactorium
47.4 × 32.6 mm45 parts2LMIT0
Sensors
83.5 × 61.8 mm38 parts2LMIT0
TI MSP430/CCServos
40.4 × 54.2 mm18 parts2LMIT0
The ADP151AUJZ-3.3-R7 in open source designs
The gallery holds 5 open source boards using the ADP151AUJZ-3.3-R7 from 3 GitHub repositories; a typical one measures about 65.4 × 58 mm and carries around 45 components.
75% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Driver by thewonderidiot.
Microcontrollers on boards using the ADP151AUJZ-3.3-R7
What boards using the ADP151AUJZ-3.3-R7 are built for
ADP151AUJZ-3.3-R7: common questions
Where can I find a ADP151AUJZ-3.3-R7 reference design?
Each of the 5 boards on this page is a real design using the ADP151AUJZ-3.3-R7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADP151AUJZ-3.3-R7 use?
Most are built on AVR/Arduino (1) and TI MSP430/CC (1).
How big is a typical board using the ADP151AUJZ-3.3-R7?
The median is 65.4 × 58 mm, and 75% are two-layer designs.
What is the most popular open source board using the ADP151AUJZ-3.3-R7?
By GitHub stars, Driver by thewonderidiot, with 4 stars.
Can I simulate one of these boards using the ADP151AUJZ-3.3-R7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.