3 open source boards using the ADR1399
Real designs built with the ADR1399, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32NV-Meter rev b
curtisseizert
150 × 100 mm489 parts6LNo license42
RP2040/RP2350AD5791-Linearity-Calibrator
NNNILabs
80 × 100 mm53 parts4LMIT16
Pcb adr1399-vref
Atmelfan
60 × 39 mm14 parts2LCERN-OHL-S-2.01
The ADR1399 in open source designs
The gallery holds 3 open source boards using the ADR1399 from 3 GitHub repositories; a typical one measures about 80 × 100 mm and carries around 53 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is NV-Meter rev b by curtisseizert.
Microcontrollers on boards using the ADR1399
What boards using the ADR1399 are built for
ADR1399: common questions
Where can I find a ADR1399 reference design?
Each of the 3 boards on this page is a real design using the ADR1399. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADR1399 use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the ADR1399?
The median is 80 × 100 mm, and 33% are two-layer designs.
What is the most popular open source board using the ADR1399?
By GitHub stars, NV-Meter rev b by curtisseizert, with 42 stars.
Can I simulate one of these boards using the ADR1399 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.