4 open source boards using the ADS1115IDGSR 0x48

Real designs built with the ADS1115IDGSR 0x48, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ADS1115IDGSR 0x48 in open source designs

The gallery holds 4 open source boards using the ADS1115IDGSR 0x48 from 2 GitHub repositories; a typical one measures about 155 × 80.6 mm and carries around 116 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is Daughterboard by BoomBoxRobotics.

Parts used alongside the ADS1115IDGSR 0x48

Microcontrollers on boards using the ADS1115IDGSR 0x48

What boards using the ADS1115IDGSR 0x48 are built for

ADS1115IDGSR 0x48: common questions

Where can I find a ADS1115IDGSR 0x48 reference design?

Each of the 4 boards on this page is a real design using the ADS1115IDGSR 0x48. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADS1115IDGSR 0x48 use?

Most are built on ESP32 (1).

How big is a typical board using the ADS1115IDGSR 0x48?

The median is 155 × 80.6 mm, and 25% are two-layer designs.

What is the most popular open source board using the ADS1115IDGSR 0x48?

By GitHub stars, Daughterboard by BoomBoxRobotics, with 2 stars.

Can I simulate one of these boards using the ADS1115IDGSR 0x48 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part