7 open source boards using the ADuM121N
Real designs built with the ADuM121N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Multislope-3I
NNNILabs
100 × 74 mm124 parts4LMIT43Current100A Artiq
KLFAMO
161 × 100 mm324 parts4LNo license0AVR/Arduino
Controller mb usb
c3h9dx
115 × 69.8 mm37 parts2LNo license0AVR/Arduino
AsmTest
honzakutil
137.1 × 81.1 mm31 parts2LNo license0Maiana Blue N0183 v7.3
Haimana
46 × 46 mm39 parts2LNo license3NMEA0183Adapter-7.1
peterantypas
52 × 42 mm39 parts2LGPL-3.0446Ch340-usb uart vcut
Netetra
28.5 × 12.3 mm19 parts2LNo license0
How designs wire the ADuM121N
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ADuM121N connects to, and the resistors, capacitors and other passives placed on it.
- The VDD1 pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF).
- The VDD2 pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD1pin 1 | Connected to: VBUS 71% · a signal 29% |
|
| GND1pin 4 | Connected to: GND 86% | — |
| GND2pin 5 | Connected to: GND 86% | — |
| VDD2pin 8 | Connected to: 3.3V 86% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NMEA0183Adapter-7.1 by peterantypas, Multislope-3I by NNNILabs, Maiana Blue N0183 v7.3 by Haimana and Controller mb usb by c3h9dx.
The ADuM121N in open source designs
The gallery holds 7 open source boards using the ADuM121N from 7 GitHub repositories; a typical one measures about 100 × 69.8 mm and carries around 39 components.
71% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is NMEA0183Adapter-7.1 by peterantypas.
Parts used alongside the ADuM121N
Microcontrollers on boards using the ADuM121N
What boards using the ADuM121N are built for
ADuM121N: common questions
Where can I find a ADuM121N reference design?
Each of the 7 boards on this page is a real design using the ADuM121N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ADuM121N VDD1 pin?
The VDD1 pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the ADuM121N.
What decoupling capacitors do designs use on the ADuM121N VDD2 pin?
The VDD2 pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the ADuM121N.
Which microcontrollers do boards using the ADuM121N use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).
How big is a typical board using the ADuM121N?
The median is 100 × 69.8 mm, and 71% are two-layer designs.
What is the most popular open source board using the ADuM121N?
By GitHub stars, NMEA0183Adapter-7.1 by peterantypas, with 446 stars.
Can I simulate one of these boards using the ADuM121N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.