2 open source boards using the SE8533X2-HF
Real designs built with the SE8533X2-HF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32NMEA2000Adapter-8.1
peterantypas
46 × 46 mm52 parts2LGPL-3.0444
NMEA0183Adapter-7.1
52 × 42 mm39 parts2LGPL-3.0444
The SE8533X2-HF in open source designs
The gallery holds 2 open source boards using the SE8533X2-HF from 1 GitHub repository; a typical one measures about 49 × 44 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is NMEA2000Adapter-8.1 by peterantypas.
Microcontrollers on boards using the SE8533X2-HF
SE8533X2-HF: common questions
Where can I find a SE8533X2-HF reference design?
Each of the 2 boards on this page is a real design using the SE8533X2-HF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SE8533X2-HF use?
Most are built on STM32 (1).
How big is a typical board using the SE8533X2-HF?
The median is 49 × 44 mm, and 100% are two-layer designs.
What is the most popular open source board using the SE8533X2-HF?
By GitHub stars, NMEA2000Adapter-8.1 by peterantypas, with 444 stars.
Can I simulate one of these boards using the SE8533X2-HF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.