4 open source boards using the ADUM1250ARZ

Real designs built with the ADUM1250ARZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ADUM1250ARZ in open source designs

The gallery holds 4 open source boards using the ADUM1250ARZ from 3 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 23 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Ducker-Charger by Angelussss.

Microcontrollers on boards using the ADUM1250ARZ

What boards using the ADUM1250ARZ are built for

ADUM1250ARZ: common questions

Where can I find a ADUM1250ARZ reference design?

Each of the 4 boards on this page is a real design using the ADUM1250ARZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADUM1250ARZ use?

Most are built on Raspberry Pi (1) and STM32 (1).

How big is a typical board using the ADUM1250ARZ?

The median is 50 × 50 mm, and 67% are two-layer designs.

What is the most popular open source board using the ADUM1250ARZ?

By GitHub stars, Ducker-Charger by Angelussss, with 18 stars.

Can I simulate one of these boards using the ADUM1250ARZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part