4 open source boards using the AMS1117-3_3
Real designs built with the AMS1117-3_3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FABulous board
FPGA-Research
101.2 × 63.5 mm75 parts4LApache-2.06Tangenta
vmetodiev
243.8 × 243.8 mm534 parts4LCERN-OHL-P-2.05FPGA
SEM hitachi-
Serhio4522
100 × 70 mm284 parts4LNo license1RP2040/RP2350
Vm1-controller
PeteHaughie
220 × 100 mm115 parts4LMIT1
The AMS1117-3_3 in open source designs
The gallery holds 4 open source boards using the AMS1117-3_3 from 4 GitHub repositories; a typical one measures about 160.6 × 85 mm and carries around 200 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is FABulous board by FPGA-Research.
Parts used alongside the AMS1117-3_3
Microcontrollers on boards using the AMS1117-3_3
AMS1117-3_3: common questions
Where can I find a AMS1117-3_3 reference design?
Each of the 4 boards on this page is a real design using the AMS1117-3_3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AMS1117-3_3 use?
Most are built on FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the AMS1117-3_3?
The median is 160.6 × 85 mm, and 0% are two-layer designs.
What is the most popular open source board using the AMS1117-3_3?
By GitHub stars, FABulous board by FPGA-Research, with 6 stars.
Can I simulate one of these boards using the AMS1117-3_3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.