6 open source boards using the AP2112
Real designs built with the AP2112, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
NoPour
plertvilai
45.7 × 66 mm68 parts2LMIT7Pinha lora gateway
brainstorm
75 × 86 mm39 parts4LNo license5ESP8266
Belle
sayanee
44.5 × 44.5 mm24 parts2LNo license4ESP32
8 Channel EEG Wifi Board
biomurph
56.9 × 90 mm181 parts4LNo license0AVR/Arduino
CatWANGrrrove
ElectronicCats
40 × 50 mm41 parts2LMIT0Luna65 Daughter Board
NeilKhera
25.4 × 25.4 mm42 parts2LCustom license6
How designs wire the AP2112
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AP2112 connects to, and the resistors, capacitors and other passives placed on it.
- The BP pin is left unconnected on 6 of 6 designs.
- The IN pin is tied to VCC on 4 of 6 designs (a signal on 2).
- The OUT pin is tied to 3.3V on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: VCC 67% · a signal 33% | — |
| GNDpin 2 | Connected to: GND 83% · a signal 17% | — |
| ENpin 3 | Connected to: Signal 67% · VIN 33% |
|
| BPpin 4 | Connected to: Not connected 100% | — |
| OUTpin 5 | Connected to: 3.3V 67% · a signal 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NoPour by plertvilai, Luna65 Daughter Board by NeilKhera, Pinha lora gateway by brainstorm and Belle by sayanee.
The AP2112 in open source designs
The gallery holds 6 open source boards using the AP2112 from 6 GitHub repositories; a typical one measures about 45.1 × 58 mm and carries around 42 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is NoPour by plertvilai.
Microcontrollers on boards using the AP2112
What boards using the AP2112 are built for
AP2112: common questions
Where can I find a AP2112 reference design?
Each of the 6 boards on this page is a real design using the AP2112. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP2112 BP pin connected?
The BP pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the AP2112.
How is the AP2112 IN pin connected?
The IN pin is tied to VCC on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the AP2112.
How is the AP2112 OUT pin connected?
The OUT pin is tied to 3.3V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the AP2112.
Which microcontrollers do boards using the AP2112 use?
Most are built on AVR/Arduino (2), ESP32 (1) and ESP8266 (1).
How big is a typical board using the AP2112?
The median is 45.1 × 58 mm, and 67% are two-layer designs.
What is the most popular open source board using the AP2112?
By GitHub stars, NoPour by plertvilai, with 7 stars.
Can I simulate one of these boards using the AP2112 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.