4 open source boards using the AP3036BKTR-G1

Real designs built with the AP3036BKTR-G1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AP3036BKTR-G1 in open source designs

The gallery holds 4 open source boards using the AP3036BKTR-G1 from 3 GitHub repositories; a typical one measures about 118.1 × 178.2 mm and carries around 127 components.

50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Flipper blackhat by o7-machinehum.

Parts used alongside the AP3036BKTR-G1

Microcontrollers on boards using the AP3036BKTR-G1

What boards using the AP3036BKTR-G1 are built for

AP3036BKTR-G1: common questions

Where can I find a AP3036BKTR-G1 reference design?

Each of the 4 boards on this page is a real design using the AP3036BKTR-G1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AP3036BKTR-G1 use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the AP3036BKTR-G1?

The median is 118.1 × 178.2 mm, and 50% are two-layer designs.

What is the most popular open source board using the AP3036BKTR-G1?

By GitHub stars, Flipper blackhat by o7-machinehum, with 292 stars.

Can I simulate one of these boards using the AP3036BKTR-G1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part