4 open source boards using the AP3602AKTR-G1
Real designs built with the AP3602AKTR-G1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Roamer
ezzatisawesome
39 × 99 mm92 parts4LNo license0STM32
AVIONICS BOARD
MatthiasGeorgImhof
80 × 80 mm178 parts4LCC-BY-NC-4.00RP2040/RP2350
FC V4c Express
proveskit
88 × 94.5 mm147 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC V4c InspireFly Special
proveskit
88 × 94.5 mm144 parts4LCERN-OHL-W-2.06
The AP3602AKTR-G1 in open source designs
The gallery holds 4 open source boards using the AP3602AKTR-G1 from 3 GitHub repositories; a typical one measures about 84 × 94.5 mm and carries around 146 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is FC V4c Express by proveskit.
Microcontrollers on boards using the AP3602AKTR-G1
What boards using the AP3602AKTR-G1 are built for
AP3602AKTR-G1: common questions
Where can I find a AP3602AKTR-G1 reference design?
Each of the 4 boards on this page is a real design using the AP3602AKTR-G1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP3602AKTR-G1 use?
Most are built on RP2040/RP2350 (2), Microchip SAM (1) and STM32 (1).
How big is a typical board using the AP3602AKTR-G1?
The median is 84 × 94.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP3602AKTR-G1?
By GitHub stars, FC V4c Express by proveskit, with 6 stars.
Can I simulate one of these boards using the AP3602AKTR-G1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.