4 open source boards using the AP62250Z6
Real designs built with the AP62250Z6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Keithley 615 Interface Board
farlepet
100 × 86 mm169 parts2LMIT0RP2040/RP2350
POEPico
tonydefilippis
40 × 100 mm137 parts4LGPL-3.00Modem carrier
harris8099
57.5 × 62.4 mm56 parts2LNo license0Breadboard power supply
harris8099
30.5 × 52.8 mm17 parts2LNo license0
The AP62250Z6 in open source designs
The gallery holds 4 open source boards using the AP62250Z6 from 3 GitHub repositories; a typical one measures about 48.8 × 74.2 mm and carries around 97 components.
75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Keithley 615 Interface Board by farlepet.
Microcontrollers on boards using the AP62250Z6
What boards using the AP62250Z6 are built for
AP62250Z6: common questions
Where can I find a AP62250Z6 reference design?
Each of the 4 boards on this page is a real design using the AP62250Z6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP62250Z6 use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the AP62250Z6?
The median is 48.8 × 74.2 mm, and 75% are two-layer designs.
What is the most popular open source board using the AP62250Z6?
By GitHub stars, Keithley 615 Interface Board by farlepet, with 0 stars.
Can I simulate one of these boards using the AP62250Z6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.