4 open source boards using the AT42QT2120-MMHR

Real designs built with the AT42QT2120-MMHR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AT42QT2120-MMHR in open source designs

The gallery holds 4 open source boards using the AT42QT2120-MMHR from 4 GitHub repositories; a typical one measures about 151.6 × 114.5 mm and carries around 143 components.

100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Wacca Touch Panel by FizzyApple12.

Microcontrollers on boards using the AT42QT2120-MMHR

What boards using the AT42QT2120-MMHR are built for

AT42QT2120-MMHR: common questions

Where can I find a AT42QT2120-MMHR reference design?

Each of the 4 boards on this page is a real design using the AT42QT2120-MMHR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AT42QT2120-MMHR use?

Most are built on NXP (1), RISC-V (1) and RP2040/RP2350 (1).

How big is a typical board using the AT42QT2120-MMHR?

The median is 151.6 × 114.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the AT42QT2120-MMHR?

By GitHub stars, Wacca Touch Panel by FizzyApple12, with 32 stars.

Can I simulate one of these boards using the AT42QT2120-MMHR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part