2 open source boards using the ATMEGA1284-A

Real designs built with the ATMEGA1284-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The ATMEGA1284-A in open source designs

The gallery holds 2 open source boards using the ATMEGA1284-A from 1 GitHub repository; a typical one measures about 49.5 × 49.5 mm and carries around 58 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Stubby by thebiguno.

Microcontrollers on boards using the ATMEGA1284-A

AVR/Arduino 2

ATMEGA1284-A: common questions

Where can I find a ATMEGA1284-A reference design?

Each of the 2 boards on this page is a real design using the ATMEGA1284-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATMEGA1284-A use?

Most are built on AVR/Arduino (2).

How big is a typical board using the ATMEGA1284-A?

The median is 49.5 × 49.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATMEGA1284-A?

By GitHub stars, Stubby by thebiguno, with 36 stars.

Can I simulate one of these boards using the ATMEGA1284-A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.