3 open source boards using the ATMEGA168-P
Real designs built with the ATMEGA168-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 55 partsAVR/Arduino
ACRIS
jwcxz
55 partsNo license7 
AVR/ArduinoPSX64 Interface THT
Commodore-Bench
92.4 × 32.8 mm17 parts2LCC-BY-NC-4.00
AVR/ArduinoIolite
jtsiomb
149 × 100 mm47 parts2LCC-BY-SA-4.032
The ATMEGA168-P in open source designs
The gallery holds 3 open source boards using the ATMEGA168-P from 3 GitHub repositories; a typical one measures about 120.7 × 66.4 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Iolite by jtsiomb.
Microcontrollers on boards using the ATMEGA168-P
What boards using the ATMEGA168-P are built for
ATMEGA168-P: common questions
Where can I find a ATMEGA168-P reference design?
Each of the 3 boards on this page is a real design using the ATMEGA168-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATMEGA168-P use?
Most are built on AVR/Arduino (3).
How big is a typical board using the ATMEGA168-P?
The median is 120.7 × 66.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATMEGA168-P?
By GitHub stars, Iolite by jtsiomb, with 32 stars.
Can I simulate one of these boards using the ATMEGA168-P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.