3 open source boards using the ATmega168A-MM
Real designs built with the ATmega168A-MM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Imu board
eshazen
11.2 × 18 mm10 parts4LNo license0AVR/Arduino
Imu board
BUNPC
16 × 8 mm10 parts4LNo license5AVR/Arduino
Imu board
BUNPC
16 × 8 mm10 parts4LNo license10
The ATmega168A-MM in open source designs
The gallery holds 3 open source boards using the ATmega168A-MM from 3 GitHub repositories; a typical one measures about 16 × 8 mm and carries around 10 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Imu board by BUNPC.
Parts used alongside the ATmega168A-MM
Microcontrollers on boards using the ATmega168A-MM
What boards using the ATmega168A-MM are built for
ATmega168A-MM: common questions
Where can I find a ATmega168A-MM reference design?
Each of the 3 boards on this page is a real design using the ATmega168A-MM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATmega168A-MM use?
Most are built on AVR/Arduino (3).
How big is a typical board using the ATmega168A-MM?
The median is 16 × 8 mm, and 0% are two-layer designs.
What is the most popular open source board using the ATmega168A-MM?
By GitHub stars, Imu board by BUNPC, with 10 stars.
Can I simulate one of these boards using the ATmega168A-MM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.